VCM Suite is a flash tuning tool that allows the reprogram and tuning of LS1 and LS2 powered vehicles' Vehicle Control Module. Using the VCM Suite, Autotech can change and optimise your vehicles behaviour and performance by altering any of its thousands of parameters set in the Vehicle Control Module. The VCM Suite can be used to increase the peformance of your LS1 or LS2 powered vehicle by altering many parameters. VCM Suite Editing software Autotech can adjust your engine and transmission to accomodate modifications including: • Exhaust System • Induction Modifications • Camshaft Changes • Fuel Injector Changes • Transmission Modifications • Rear Gear Changes • Tyre Size Changes In addition whenever you require, the VCM software can be re-mapped to suit your upgrades or changes in engine or transmission performance. Auto trans calibration software Some of the features that can be edited with VCM Suite include: • Ignition advance • Knock retard • Fuel mixture • Idle speed • Idle control • RPM limiter • Speed Limiter • Transmission shift points • Transmission shift firmness • Transmission torque reduction • Transmission shift pressure • Torque converter clutch • Fan on/off temperature thresholds • Speedometer calibration • Rear gear ratio These are just a few of the many parameters that can be controlled allowing for varying levels of modification and peformance of you LS1 or LS2 powered vehcile. VCM Suite can also be used to diagnose faults with your vehcile leading to quick and effective repair of faulty components. The VCM Scanner utility is a fully featured OBDII scanning and diagnostic tool. It allows viewing, charting and logging of diagnostic data in real time via the vehicle OBDII diagnostic data port. It also allows viewing of vehicle Diagnostic Trouble Codes (DTC's) and other vehicle information. No editor package can be considered complete without comprehensive scan tool capabilities. Upgrades are optional. These components combine to make VCM Suite the most feature rich, powerful and comprehensive VCM/PCM reprogramming and diagnostics package available on the market today. Autotech can combine the VCM Suite software and tune together with various aftemarket components including throttle bodies, cold air intakes, larger injectors, fuel system upgrades, transmission upgrades and more. If you would like further informatio on the VCM Suite for the LS1 and LS2 vehciles, please do not hesitate to contact Autotech Engineering via email on sales@autotechengineering.com.au or by phone on (02)9897 1378