CAPA Flash Tuner is the complete stealth programming system to unlock the hidden power potential of your Ford Vehicle. With the Flash Tuner you can add up to 50 extra kilowatts of grunt*, improve fuel economy, and firm up the auto transmission. CAPA Flash Tuner makes your Ford or FPV a dead-set performer with ease. The Capa Flash Tuner offers a no-wires, no fuss, simple installation with the flexibility of offering 3 generic tunes at a great, affordable price. The Flash Tuner can load one of the 3 tunes into the customer's car at any time, and can be custom tuned by Autotech to suit individual car performance level, and re-tuned whenever it is required. The Capa Flash Tuner can be fitted to the following cars by Autotech Engineering: • Ford Territory 6cyl 4 Litre, Automatic Transmission • BA 6cyl 4 Litre, Automatic Transmission • BA 6cyl 4 Litre, Manual Transmission • BA 6cyl Turbo 4 Litre, Automatic Transmission • BA 6cyl Turbo 4 Litre, Manual Transmission • BA 8cyl 5.4 Litre 3 Valve, Automatic Transmission • BA 8cyl 5.4 Litre 3 Valve, Manual Transmission • BA 8cyl 5.4 Litre 4 Valve XR8, Automatic Transmission • BA 8cyl 5.4 Litre 4 Valve XR8, Manual Transmission • BA 8cyl 5.4 Litre 4 Valve GT, Automatic Transmission • BA 8cyl 5.4 Litre 4 Valve GT, Manual Transmission • AU 6cly and 8 and 8 Cyl Manual and Automatic transmission • 7.4L Powerstroke Diesel F250 Trucks • Complete range of American vehicles ehicles as per SCT Database Autotech Engineering can fit and tune the Capa Flash Tuner with a total of 3 different tunes to suit the customer's requirements. For example, these could include: • 95 Octane Tune (Medium power for everyday use) • 98 Octane Performance Tune (Maximum power for racing/performance use) • Valeet Tune (with speed limited tune and stock performance). These are a few examples of the options available with the Capa Flash Tuner. Customers can also request to run the Capa Flash Tuner together with other ECU Tuning devices (Like Unichip, Haltech Interceptor) for maximum peformance. Once Autotech have custom tuned your Capa Flash Tuner you can change the tunes in your car at any time you wish. Below is an outline of the simple proceedure involved in changing the tune. A detailed explanation also comes with the Flash Tuner when sold.   1. Plug the flash tuner into the diagnostics port of your car (under the fuse panel).   2. With the key off, use the ‘SELECT’ button to choose the program you wish to install into the car (Factory, 1, 2 or 3).   3. With the LED lit up on the program you wish to install, hold the program button for 3 seconds. The LEDs will flash on and off. This will time out after 30 seconds.   4. While the LEDs are flashing, turn the ignition to on (dash lights illuminate) but do not start the vehicle. The flash tuner will now download your factory program and upload the new program.   5. Once the lights stop flashing, the programming is done. Turn the key to the off position and remove the OBD-II connector. Turn the key to on and verify that the car starts.   If you would like further informatio on the Capa Flash Tuner for the Ford vehciles, please do not hesitate to contact Autotech Engineering via email on sales@autotechengineering.com.au or by phone on (02)9897 1378